China NEMA 17 Planetary Gear Stepper Motor with High Torque and Smooth Running for CNC motor engine

Item Description

 

Product Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Software:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc
 

Item Parameters

Planetary Equipment Box Specification:

Housing Materials Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Engage in of Shaft (close to to Flange) ≤0.06mm
Axial Engage in of Shaft ≤0.3mm
Backlash at No-load one stage≤1°,2stage≤1.2°,3stage≤1.5°

42HS Hybrid Stepping Motor Technical specs:
 

Model No. Step Angle Motor Duration(L1) Rated Present Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Section /Phase /Section
Solitary Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 one.eight 34 2.93 1.33 2.2 three.5 270 four thirty .22 ≤1:369
42HSC4409 1.8 forty two.5 one.5 one.65 three.3 380 4 40 .three ≤1:369

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio three.seventy one 5.eighteen fourteen 19 27 51 71 100 139 189 264 369
Whole Top(L1+L2) (mm) 65.five 65.5 seventy six.one 76.1 76.one 86.five 86.five 86.5 86.5 ninety six.nine ninety six.nine ninety six.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 ten thousand ten thousand 10000 10000 ten thousand ten thousand
Overall Excess weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Variety of equipment trains 1 2 3 4
Reducer Length(L2)   (mm) 31.five 42.1 52.five 62.9
Performance 90% 81% 73% 66%

 

42HSC4409 Planetary Gearbox Specs:
Reduction ratio 3.71 5.18 fourteen 19 27 fifty one 71 a hundred 139 189 264 369
Complete Top(L1+L2) (mm) 71.5 71.five eighty two.1 82.1 eighty two.one 92.5 92.five 92.five ninety two.five 102.nine 102.nine 102.nine
Output torque ( mN.m) 1269 1772 4309 5000 5000 ten thousand 10000 ten thousand 10000 10000 ten thousand 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Amount of equipment trains 1 2 3 4
Reducer Size(L2)   (mm) 31.five 42.1 52.5 62.nine
Effectiveness 90% 81% 73% 66%

 

Thorough Pictures

 

 

Firm Profile

ZheJiang UMot Technologies Co., Ltd. specializes in R&D and income of stepper motors, servo motors, linear modules and connected motion control goods, customizing and planning higher-good quality motor items for consumers with unique demands close to the globe, and offering general remedies for movement management methods. Items are exported to far more than thirty international locations and locations which includes the United States, Germany, France, Italy, Russia, and Switzerland. The firm’s main merchandise and program design have been commonly employed in automation manage, precision instruments, health care gear, sensible home, 3D printing and numerous other fields.
Our firm has been acknowledged as a large-tech enterprise by appropriate departments, has a complete quality administration technique, has attained ISO9001, CE, RoHs and other associated certifications, and retains a amount of electrical patent certificates. “Concentration, Professionalism, Focus” in the subject of automation of motor R&D and program control answers is the firm’s company goal. “Be your most trusted associate” is the firm’s provider philosophy. We have usually been aiming to “make initial-class products with expert technological innovation”, preserve tempo with the occasions, innovate consistently, and give a lot more users with far better items and providers.

FAQ

one. Shipping method:
1)Worldwide Convey delivery DHL&FEDEX &UPS&TNT& 7-10days
two)Shipping by air 7-ten days
three)shipping and delivery by sea, delivery time depends on the vacation spot port.

two. Complex Assistance:
We can provide you with specialist technological support. And our goods good quality ensure is 6 months. Also, we acknowledge merchandise personalized.

3. Why must you purchase from us, not from other suppliers?
Specialist a single-to-1 motor customized. The world’s big business of choice for substantial-good quality suppliers. ISO9001:2008 good quality administration program certification, by means of the CE, ROHS certification.

four. How to select designs?
Just before buying, please contact us to confirm model No. and requirements to steer clear of any misunderstanding.

5. Are you a manufacturing unit?
Yes, we are a manufacturing facility, and we create stepper motor/driver, Servo motor/driver.

 

US $31.2-54.68
/ Piece
|
1 Piece

(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) 0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%
US $31.2-54.68
/ Piece
|
1 Piece

(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) 0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China NEMA 17 Planetary Gear Stepper Motor with High Torque and Smooth Running for CNC     motor engine	China NEMA 17 Planetary Gear Stepper Motor with High Torque and Smooth Running for CNC     motor engine
editor by czh 2022-12-16