China High efficiency 66-150mm Motor Length Planetary deceleration stepping motor for laser cutting manufacturer

Item Description

 

 

Product Description

  

Planetary stepper motor has the traits of higher precision, high rigidity, large load, higher performance, substantial pace ratio, substantial daily life, minimal inertia, low vibration, reduced sounds, minimal temperature rise, gorgeous appearance, light framework, simple set up, exact positioning and so on.
 

 

Merchandise Parameters

Complex information of gearbox
 

Equipment Ratio L1
Length(mm)
Effectiveness Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Stage five 74 95% 50N.m 100N.m @1m
≤60dB
≤15arcmin 3000
ten
2 Stage fifteen 93 90% 80N.m 160N.m ≤25arcmin 4000
twenty
25
30
forty
50

Stepper motor Electrical Specifications  

Series
Product
 
Rated
Existing
(A)
Stage
Resistance
(Ω)
Phase
Inductance
(mH)
Guide
Wire
(No.)
Keeping
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(Kg.cm²)
Motor
Fat
(Kg)
Action
Angle
(°)
34HS6402 7. .sixteen .9 4 three. sixty six .85 2. 1.eight
34HS8402 .2 one.six 4.5 78       1.05 two.5
34HS4402 .33 3.two 8.five 114 one.8 three.5
34HS5402 .4 four.8 12 one hundred fifty 2.five 4.two

Notice:We can manufacture products according to customer’s needs.
 

Item screen

 

Proportions(Device: mm)

 

 

Our Positive aspects

 

Application

 

Company Profile

HangZhou CZPT Motor Co., Ltd, proven in 2004, is a high-tech enterprise, which is engaged in the improvement, creation and selling sorts of micro motor and movement handle systems.
Making use of large-high quality components, innovative production procedure and rigorous high quality administration our merchandise line consists of practically all sorts of high-good quality motors, this kind of as hybrid stepper motors, shut-loop stepper motors, brushless DC motors, servo motors, and many others. Our company is 1 of the leading producers in domestic and global industry, and our items are at the identical stage of global renowned-manufacturer types. Our goods are widely utilised in computer peripheral gadgets, communications, phase lights, textiles, packaging, printing, healthcare tools, stitching equipment, and other industrial automation methods.
Our organization is prosperous in technical encounter, we use sophisticated generation approach and tests tools, and obeys sophisticated good quality management requirements in creation, these kinds of as ISO9001: 2008, 6 Sigma. In addition to, our firm also has attained the CE certification, and all of our items are RoHS compliant.
With the spirit of “solution innovation, large good quality, excellent service”, our business will repeatedly concentrate on micro motor market, and supply far more high-quality items and far more specialist services for our clients. We try out our best to earn the client’ S have faith in by our higher-good quality goods, excellent services and reasonable rates. We are turning into the leader of the micro motor sector.

 

Certifications

 

 

FAQ

Payments

1) We can take EXW, FOB
2) Payment need to be produced ahead of shipment.
three) Import obligations, taxes and fees are not provided in the merchandise cost or shipping charges. These charges are the buyer’s duty.

Delivery
one) We only ship to your verified tackle. Remember to make sure your shipping and delivery deal with is right before obtain.
two) Most orders will be delivered out in 3-7 working days upon payment confirmation.
3) Shipping and delivery generally requires 7-twenty five functioning days. Most of the things will shipping and delivery in 2 weeks, although there will be a delay for anything we cannot management (this sort of as the undesirable weather). If it transpires, just speak to us, we will assist you verify and take care of any difficulty.
three) Please  check the package deal on receipt, if there are some damages, please get in touch with us immediately.
Opinions & Refund
  1) Opinions is crucial to us, if you have any issue with our products, remember to get in touch with us, our technician will give you beneficial advises.
  2) When you have the parcel and not pleased with the products or it is other difficulty, please notify us quickly, and offer us a photo showing the depth.
  3) Any explanation requiring for all refund. Things should be in original situation and no physical hurt. Purchaser liable for all transport cost.

 If you want a lot more information, remember to make contact with with us. We will connect wonderful importance to your any issues.
Hope we could set up a long-term efficient cooperation. 

 

Application: Welding
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear Ratio L1
Length(mm)
Efficiency Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Stage 5 74 95% 50N.m 100N.m @1m
≤60dB
≤15arcmin 3000
10
2 Stage 15 93 90% 80N.m 160N.m ≤25arcmin 4000
20
25
30
40
50

###

Series
Model

 
Rated
Current
(A)
Phase
Resistance
(Ω)
Phase
Inductance
(mH)
Lead
Wire
(No.)
Holding
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(Kg.cm²)
Motor
Weight
(Kg)
Step
Angle
(°)
34HS6402 7.0 0.16 0.9 4 3.0 66 0.85 2.0 1.8
34HS8402 0.2 1.6 4.5 78       1.05 2.5
34HS4402 0.33 3.2 8.5 114 1.8 3.5
34HS5402 0.4 4.8 12 150 2.5 4.2
Application: Welding
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear Ratio L1
Length(mm)
Efficiency Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Stage 5 74 95% 50N.m 100N.m @1m
≤60dB
≤15arcmin 3000
10
2 Stage 15 93 90% 80N.m 160N.m ≤25arcmin 4000
20
25
30
40
50

###

Series
Model

 
Rated
Current
(A)
Phase
Resistance
(Ω)
Phase
Inductance
(mH)
Lead
Wire
(No.)
Holding
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(Kg.cm²)
Motor
Weight
(Kg)
Step
Angle
(°)
34HS6402 7.0 0.16 0.9 4 3.0 66 0.85 2.0 1.8
34HS8402 0.2 1.6 4.5 78       1.05 2.5
34HS4402 0.33 3.2 8.5 114 1.8 3.5
34HS5402 0.4 4.8 12 150 2.5 4.2

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China High efficiency 66-150mm Motor Length Planetary deceleration stepping motor for laser cutting     manufacturer China High efficiency 66-150mm Motor Length Planetary deceleration stepping motor for laser cutting     manufacturer
editor by czh 2022-12-21