China factory BMS50 Hydraulic CHINAMFG Neutral Package/Wooden Pallet Bmm Orbit Gear Motor with Hot selling

Product Description

GRH specialized in providing hydraulic components and solutions for hydraulic systems.
With continuous improvement and enthusiasm over the past 30 years, CHINAMFG has developed into an emerging power in the fluid power industry since it was established in 1986.
GRH (ZheJiang )  – International Sales Office
GRH (ZheJiang )  –  Manufacturing Facility and Domestic Sales Office

GRH specializes in offering hydraulic components and technology solutions for hydraulic years for more than 30 years, with our establishment way back in 1986.

Our product catalogue is extensive, with our primary products including hydraulic gear pumps and pump valve assemblies, hydraulic power units, proportional valves, monoblock directional control valves, cycloidal speed reducers, hydraulic gear motors and geared flow dividers. We also offer a full line of hydraulic technology and system solutions, connecting our experience with expert staff, ensuring we are able to fully meet an array of customer requirements, with the hydraulic components widely used in industrial machinery, lifting machinery, construction machinery, agricultural equipment and other industrial applications.GRH covers an area of 120,000m2, employs over 300 staff and annually produces more than 1 million hydraulic components sold to more than 100 countries around the world.

 

Following ISO9000/TS16949 quality management system standards, CHINAMFG uses ERP production management systems to provide high quality hydraulic products for customers. To purse advanced technology, CHINAMFG is equipped with 305 sets of various machining centers and equipment, including a German high speed cutting center, American honing machine, special CHINAMFG boring machine and more. Strict processes and management keep the assembly process always under control. All the delivered products will be 100% tested and inspectors conduct sampling inspection according to international standards. Strict control over time, pressure, temperature, flow, stroke and other parameters ensures the quality stability and reliability of outgoing products.Advanced technologies, reliable quality and performance, and a meticulous service spirit allow CHINAMFG to be highly recognized by CHINAMFG customers.

    

Production description

 

GRH specialized in providing hydraulic components and solutions for hydraulic systems.
With continuous improvement and enthusiasm over the past 30 years, CHINAMFG has developed into an emerging power in the fluid power industry since it was established in 1986.

GRH (ZheJiang )  – International Sales Office
GRH (ZheJiang )  –  Manufacturing Facility and Domestic Sales Office
    

 About Us
Our product catalogue is extensive, with our primary products including hydraulic gear pumps and pump valve assemblies, hydraulic power units, proportional valves, monoblock directional control valves, cycloidal speed reducers, hydraulic gear motors and geared flow dividers. We also offer a full line of hydraulic technology and system solutions, connecting our experience with expert staff, ensuring we are able to fully meet an array of customer requirements, with the hydraulic components widely used in industrial machinery, lifting machinery, construction machinery, agricultural equipment and other industrial applications.
GRH covers an area of 120,000m2, employs over 300 staff and annually produces more than 1 million hydraulic components sold to more than 100 countries around the world. Following ISO9000/TS16949 quality management system standards, CHINAMFG uses ERP production management systems to provide high quality hydraulic products for customers. To purse advanced technology, CHINAMFG is equipped with 305 sets of various machining centers and equipment, including a German high speed cutting center, American honing machine, special CHINAMFG boring machine and more. Strict processes and management keep the assembly process always under control. All the delivered products will be 100% tested and inspectors conduct sampling inspection according to international standards. Strict control over time, pressure, temperature, flow, stroke and other parameters ensures the quality stability and reliability of outgoing products.
Advanced technologies, reliable quality and performance, and a meticulous service spirit allow CHINAMFG to be highly recognized by CHINAMFG customers. 

Production description

Company Information

 

GRH specializes in offering hydraulic components and technology solutions for hydraulic years for more than 30 years, with our establishment way back in 1986.

Our product catalogue is extensive, with our primary products including hydraulic gear pumps and pump valve assemblies, hydraulic power units, proportional valves, monoblock directional control valves, cycloidal speed reducers, hydraulic gear motors and geared flow dividers. We also offer a full line of hydraulic technology and system solutions, connecting our experience with expert staff, ensuring we are able to fully meet an array of customer requirements, with the hydraulic components widely used in industrial machinery, lifting machinery, construction machinery, agricultural equipment and other industrial applications.GRH covers an area of 120,000m2, employs over 300 staff and annually produces more than 1 million hydraulic components sold to more than 100 countries around the world.

 

Following ISO9000/TS16949 quality management system standards, CHINAMFG uses ERP production management systems to provide high quality hydraulic products for customers. To purse advanced technology, CHINAMFG is equipped with 305 sets of various machining centers and equipment, including a German high speed cutting center, American honing machine, special CHINAMFG boring machine and more. Strict processes and management keep the assembly process always under control. All the delivered products will be 100% tested and inspectors conduct sampling inspection according to international standards. Strict control over time, pressure, temperature, flow, stroke and other parameters ensures the quality stability and reliability of outgoing products.Advanced technologies, reliable quality and performance, and a meticulous service spirit allow CHINAMFG to be highly recognized by CHINAMFG customers.

Certifications

Customer Photos

Packaging & Shipping

Varies ways of packing for excavator attachments, you have most volume saved with Nude Pack, easier loading and unloading with Pallet and Frame pack, stacking high for small excavator bucket or other attachments with Frame Pack. While just as much as merits, each way of packing has its demerits. Pack and Frame Pack allows minimum scrathing of paint, but less loading.

FAQ

Q: what’s your advantages? A: Factory established in 1986; With a great deal of production experience; 370 employees become the professional team; Constant updated ERP system ensure efficiency of work; Sophisticated equipment ehanced the accuracy of products; Professional salesmen provide the greast service; With a large number of famous customers all over the world; Great after-sales service; With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Q: What is your payment terms? A: Small order/sample order,full payment in advance; full order,30% deposit and the balance before shippment. Q: Can you make my own brand on the products? A: Of course we can.
Q: What Is Our Main Export Market? A: America(45.5%):USA, Canada, Argentina, Brazil Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland. Asia(18.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon. Others(5.8%).

The competitive advantage of product line:

Production capacity:

Product Line Name Production Line Capacity Actual Units Produced(Previous Year)
Gear Pump,Hydraulic Motor/Hydraulic Control Valve/Hydraulic Power Unit    

Export Market Distribution:

Market Revenue(Previous Year) Total Revenue (%)
North America 0 60
South America 0 10
Eastern Europe 0 10
South Asia 0 10
Domestic Market 0 10

Testing Machinery:

Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition
Three-coordinates Measuring Machine CRYSTA-AS574 1 7 acceptable
Horizontal Machining Center Horizontal Machining Center 5 7 acceptable
Heat Energy Deburring Machine ITBM400 1 7 acceptable
Vertical Grinding Machine O325-14LB 1 6 acceptable
CNC Lathe GS200PLVS 36 9 acceptable
Semi-automatic Gear Machine YB3150E 5 6 acceptable
Sonicleaning Machine N/A 2 6 acceptable
Spray Painting Line N/A 1 6 acceptable
Heat Treating Machine N/A 5 7 acceptable

Short lead time:

Products Name Order(in the last 12month) Shortest Lead Time
Gear Pump; Hydraulic Motor; Hydraulic Control Valve; Hydraulic Power Unit 6 Pcs 40 Days

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO9001
Excitation Mode: None
Power Rating: None
Casing Protection: Cast Iron
Number of Poles: 0
Speed: High Speed
Samples:
US$ 65/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

What types of feedback mechanisms are commonly integrated into gear motors for control?

Gear motors often incorporate feedback mechanisms to provide control and improve their performance. These feedback mechanisms enable the motor to monitor and adjust its operation based on various parameters. Here are some commonly integrated feedback mechanisms in gear motors:

1. Encoder Feedback:

An encoder is a device that provides position and speed feedback by converting the motor’s mechanical motion into electrical signals. Encoders commonly used in gear motors include:

  • Incremental Encoders: These encoders provide information about the motor’s shaft position and speed relative to a reference point. They generate pulses as the motor rotates, allowing precise measurement of position and speed changes.
  • Absolute Encoders: Absolute encoders provide the precise position of the motor’s shaft within a full revolution. They do not require a reference point and provide accurate feedback even after power loss or motor restart.

2. Hall Effect Sensors:

Hall effect sensors use the principle of the Hall effect to detect the presence and strength of a magnetic field. They are commonly used in gear motors for speed and position sensing. Hall effect sensors provide feedback by detecting changes in the motor’s magnetic field and converting them into electrical signals.

3. Current Sensors:

Current sensors monitor the electrical current flowing through the motor’s windings. By measuring the current, these sensors provide feedback regarding the motor’s torque, load conditions, and power consumption. Current sensors are essential for motor control strategies such as current limiting, overcurrent protection, and closed-loop control.

4. Temperature Sensors:

Temperature sensors are integrated into gear motors to monitor the motor’s temperature. They provide feedback on the motor’s thermal conditions, allowing the control system to adjust the motor’s operation to prevent overheating. Temperature sensors are crucial for ensuring the motor’s reliability and preventing damage due to excessive heat.

5. Hall Effect Limit Switches:

Hall effect limit switches are used to detect the presence or absence of a magnetic field within a specific range. They are commonly employed as end-of-travel or limit switches in gear motors. Hall effect limit switches provide feedback to the control system, indicating when the motor has reached a specific position or when it has moved beyond the allowed range.

6. Resolver Feedback:

A resolver is an electromagnetic device used to determine the position and speed of a rotating shaft. It provides feedback by generating sine and cosine signals that correspond to the shaft’s angular position. Resolver feedback is commonly used in high-performance gear motors requiring accurate position and speed control.

These feedback mechanisms, when integrated into gear motors, enable precise control, monitoring, and adjustment of various motor parameters. By utilizing feedback signals from encoders, Hall effect sensors, current sensors, temperature sensors, limit switches, or resolvers, the control system can optimize the motor’s performance, ensure accurate positioning, maintain speed control, and protect the motor from excessive loads or overheating.

gear motor

Can gear motors be used for precise positioning, and if so, what features enable this?

Yes, gear motors can be used for precise positioning in various applications. The combination of gear mechanisms and motor control features enables gear motors to achieve accurate and repeatable positioning. Here’s a detailed explanation of the features that enable gear motors to be used for precise positioning:

1. Gear Reduction:

One of the key features of gear motors is their ability to provide gear reduction. Gear reduction refers to the process of reducing the output speed of the motor while increasing the torque. By using the appropriate gear ratio, gear motors can achieve finer control over the rotational movement, allowing for more precise positioning. The gear reduction mechanism enables the motor to rotate at a slower speed while maintaining higher torque, resulting in improved accuracy and control.

2. High Resolution Encoders:

Many gear motors are equipped with high-resolution encoders. An encoder is a device that measures the position and speed of the motor shaft. High-resolution encoders provide precise feedback on the motor’s rotational position, allowing for accurate position control. The encoder signals are used in conjunction with motor control algorithms to ensure precise positioning by monitoring and adjusting the motor’s movement in real-time. The use of high-resolution encoders greatly enhances the gear motor’s ability to achieve precise and repeatable positioning.

3. Closed-Loop Control:

Gear motors with closed-loop control systems offer enhanced positioning capabilities. Closed-loop control involves continuously comparing the actual motor position (as measured by the encoder) with the desired position and making adjustments to minimize any position error. The closed-loop control system uses feedback from the encoder to adjust the motor’s speed, direction, and torque, ensuring accurate positioning even in the presence of external disturbances or variations in the load. Closed-loop control enables gear motors to actively correct for position errors and maintain precise positioning over time.

4. Stepper Motors:

Stepper motors are a type of gear motor that provides excellent precision and control for positioning applications. Stepper motors operate by converting electrical pulses into incremental steps of movement. Each step corresponds to a specific angular displacement, allowing precise positioning control. Stepper motors offer high step resolution, allowing for fine position adjustments. They are commonly used in applications that require precise positioning, such as robotics, 3D printers, and CNC machines.

5. Servo Motors:

Servo motors are another type of gear motor that excels in precise positioning tasks. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer high torque, high speed, and excellent positional accuracy. Servo motors are capable of dynamically adjusting their speed and torque to maintain the desired position accurately. They are widely used in applications that require precise and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems.

6. Motion Control Algorithms:

Advanced motion control algorithms play a crucial role in enabling gear motors to achieve precise positioning. These algorithms, implemented in motor control systems or dedicated motion controllers, optimize the motor’s behavior to ensure accurate positioning. They take into account factors such as acceleration, deceleration, velocity profiling, and jerk control to achieve smooth and precise movements. Motion control algorithms enhance the gear motor’s ability to start, stop, and position accurately, reducing position errors and overshoot.

By leveraging gear reduction, high-resolution encoders, closed-loop control, stepper motors, servo motors, and motion control algorithms, gear motors can be effectively used for precise positioning in various applications. These features enable gear motors to achieve accurate and repeatable positioning, making them suitable for tasks that require precise control and reliable positioning performance.

gear motor

How does the gearing mechanism in a gear motor contribute to torque and speed control?

The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:

The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.

Torque Control:

The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.

By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.

Speed Control:

The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.

By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.

In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.

China factory BMS50 Hydraulic CHINAMFG Neutral Package/Wooden Pallet Bmm Orbit Gear Motor   with Hot selling	China factory BMS50 Hydraulic CHINAMFG Neutral Package/Wooden Pallet Bmm Orbit Gear Motor   with Hot selling
editor by CX 2024-05-14